Shang Shing Steel Manufacturing Co.,Ltd
Made in Taiwan
0.30mm
0.33mm
0.36mm
0.42mm
6" x 2W (2.3mm)
6" x 2" (2.3mm)
5" x 2" (2mm, 1.75mm, 1.5mm)
4" x 2" (2mm, 1.75mm, 1.5mm,)
3" x IV2" (lmm, 0.8mm, 0.6mm)
2" x 2" (lmm, 0.8mm, 0.6mm)
| Model | V430 Series | V 480Series | V530Series |
| Specifications | V1730, V1740, V1760 | V1930, V 1940, V1960, V1980 | V2140, V2160, V2180 |
| Swing Over Bed | 430 mm | 470 mm | 520 mm |
| Swing Over Cross Slide | 240 mm | 280 mm | 330 mm |
| Center Distance(mm) | 760,1000,1500 | 760,1000,1500, 2000 | 1000,1500, 2000 |
| Swing Over Gap | 650 mm | 690 mm | 740 mm |
| Bed Width | 300 mm | ||
| pindle Nose | ASA Dl - | ■6/D1-8 (Opt.) | ASA Dl - 8 78 mm MT7 |
| Spindle Bore | 58mm | /78mm (Opt.) | |
| Taper of Spindle Bore | MT6 | ||
| Spindle Speed | 20 - 2000 rpm (Stepiess) | ||
| Inch Threads Range | 4 - 56 TPI | ||
| Metric Threads Range | P 0.5 - P 7 | ||
| Longitudinal Feeds Range | 0.05 - 0.82 mm | ||
| Cross Feeds Range | 0.02 - 0.4 mm | ||
| Leadscrew Diameter | 35 mm | ||
| Leadscrew Pitch | 4 TPI or 6mm | ||
| Taper of Tail Center | MT 4 | ||
| Tail Spindle Travel | 150 mm | ||
| Tail Spindle Diameter | 58 mm | 58 mm | 68 mm |
| Main Drive Motor | 7.5HP (5.625 KW) | ||
| Coolant Pump | 1/8 HP (0.1 KW) | ||
| Compound Rest Travel | 125mm | ||
| Cross Slide Travel | 245mm | 275 mm | |
| Machine Dimensions (cm) | L: 189, 215, 265 | L: 189, 215, 265, 317 | L: 215,265,317 |
| W: 81 | W: 81 | W: 81 | |
| H: 119 | H: 122 | H: 125 | |
| Packing Dimensions (cm) | L: 198, 228, 279 | L: 198, 228, 279, 337 | L: 228,279,337 |
| W: 95 | W: 95 | W: 95 | |
| H: 162 | H: 162 | H: 162 | |
| Net Weight | 1680, 1760, 2050 | 1720,1800, 2075, 2380 | 1810, 2135, 2440 |
| Gross Weight | 1780,1860, 2200 | 1820,1900, 2225, 2530 | 1910, 2285, 2590 |
No. (527/529), Lower Pazundaung Road,
Pazundaung Township, Yangon, Myanmar.
(+951) 299201, 9000300, 9000301
(+951) 202955
mmktrading999@gmail.com, info@myintmyatkyaww.com